Troubleshooting: Cannot Deploy to the iOS Device

From RAD Studio
(Redirected from RunIOSDeviceFailedHelpPage)
Jump to: navigation, search

Go Up to iOS Mobile Application Development

To resolve this problem, look at these areas:

  1. Make sure your iOS device is connected to your Mac by USB cable.
  2. Specify an iOS device platform as the target platform in the Project Manager.
  3. Complete the Provisioning page. (Your developer certificate is required for code signing.)
  4. Set the required Project Options for your iOS app:
  5. Make sure that the Xcode command-line tools are installed on your Mac. (Required for code signing your iOS app.)
  6. Upgrade Xcode if there is a newer version available. (Required after you upgrade your iOS device.)
  7. If you get an error dialog box with the error message "Unable to install package" followed by an error code, perform the appropriate steps as described here:
    • e800000e: The version of Xcode that is installed on your Mac does not support the iOS version of your device. Install a version of Xcode on your Mac that supports the iOS version of your device. After the upgrade, unplug and plug again your iOS device to your Mac.
    • e800002d: The debug symbol found on your Mac does not match with the debug symbol found on your iOS Device.
    • e800003a: You are trying to install an application with the same name to a previously installed application in the target device, but signing the application with a different Developer Certificate. RAD Studio tries to upgrade the existing application using a different developer certificate.
      • Uninstall the existing application in the target device, and try to run your application again.
      • In Project > Options > Provisioning, select the same Developer Certificate to sign your application.
    • e800007e: Your iOS device version is lower than the default minimum version.
      Select Project > Options > Delphi Compiler > Linking and change Minimum iOS version supported to the version of your iOS device. For example: 7.0. (If this does not work, you might need to acquire a newer iOS device.)
    • e8000080: You are trying to run your iOS application on an iOS device that does not match the iOS form factor (UIDeviceFamily) defined for your project. For example, you might be trying to run your iOS application on an iPad, but your application is configured to run on an iPhone only.
      Select Project > Options > Version Info and choose a UIDeviceFamily value that matches your iOS device. For example, choose iPhone & iPad to run your application on any iOS device.
    • e8000097: You have turned on Restrictions in the target iOS device, that prevent installing new applications in the device. For more information, see About Restrictions (parental controls).
      Turn off Restrictions in the target device, and try to run your application again.
    • e8008015: The target iOS device has not been provisioned with the provisioning profile that you configured in RAD Studio.
      You can either provision the target device with the configured provisioning profile, or change the RAD Studio project configuration to a different provisioning profile. See Completing the Provisioning Page.
      Ensure that your provisioning data in RAD Studio matches your iOS developer account, and not your Mac developer account. Be specially careful when you specify your iOS developer certificate name.
    • e8008016: Possible causes are:
    • e8008018: Your certificate is out of date. Download a new version of your certificate.
    • e8008019: This error happens when you try to run an application built using the Application Store platform configuration on an iOS device. To run your application on an iOS device, you must use the Debug or Ad hoc platform configuration instead. To generate your application package for submission to the App Store, you must deploy your application.
  8. If you get an error dialog box with the error message "Unable to locate DeviceSupport directory matched with connected device info":
  9. If you get an error dialog box with the error message "Application bundle should have Info.plist inside", select Project > Build > ProjectName to regenerate the info.plist file.
  10. If you get an error dialog box with the error message "The program being debugged is not being run", restart both your iOS device and your Mac.

If you see an error entry with an error code in the Messages tool window, on the bottom of the RAD Studio interface, select that entry and press F1 to open the help for that error.

Synchronizing the Xcode with Your iOS Device

You need to ensure that the Xcode that is installed in the Mac supports the iOS version of the iOS device, and that they are synchronized. To do so, follow these steps:

  1. Unplug your iOS device from the Mac.
  2. Open Xcode on your Mac.
  3. From the main menu, select Window, Devices.
  4. Attach your iOS device back to the Mac.
  5. On the Devices window, select your iOS device on the left-hand side of the window.
  6. Wait for the loading wheel OSX Loader Wheel.png to disappear. When it does, you can close Xcode and try to run or debug your application again.

For more information, see these help topics